The American DJ Saber Spot WW is a remarkable compact pinspot featuring a 15 - Watt warm white LED. It offers DMX - 512 control, ensuring flicker - free operation, which is perfect for film and television. With strobing and electronic dimming from 0 - 100%, it gives you full lighting control. The rear panel has a 4 - button DMX display system for easy setup. Its built - in ACL lens creates a super sharp 4 - degree beam angle. The scissor bracket system allows you to either hang the fixture or place it on the ground. Ideal for performance stages, installations, table spotting, and lighting retail stores. Key features include a compact design with an ACL lens for a tight beam, a 4 - button LED display on the rear, no duty cycle for all - night running, a strobe effect, and more. Technical specs: 15 - Watt Warm White LED, 2 DMX Channel modes (1 or 2 channels), linkable via 3 - pin XLR cables, 15W max power draw, long - life LEDs (10,000 hrs.), 3 - pin XLR and powerCON In/Out, multi - voltage (100 - 240V, 47/63Hz), dimensions of 3.5' x 6.75' x 3.5' (88 x170 x 87mm), and a weight of 2.6 lbs. (1.2 kgs).
Using the Saber Spot WW is easy. First, connect it to power using the powerCON In/Out. Make sure the voltage is set correctly as it supports 100 - 240V, 47/63Hz. Then, link it to other fixtures via the 3 - pin XLR cables if you want to use multiple units. You can control it in 1 or 2 DMX channel modes using the 4 - button LED display on the rear panel. You can hang it with the scissor bracket or place it on the ground according to your needs. For strobing and dimming effects, just adjust the settings through the DMX control. When not in use, store it in a dry place. Avoid exposing it to water or extreme temperatures. To keep it in good condition, clean the lens gently with a soft cloth regularly. And remember, the LEDs have a long life of 10,000 hours, but still, turn it off when not needed to save energy.
