The Antari DNG-250 is an upgraded high-output low fog machine. Compared to its predecessor, the DNG-200, it features a more powerful heating element and a more efficient refrigeration system. This allows it to create a larger volume of fog with even better low-lying effects. It has a 10-liter fluid tank, uses Antari FLL-10 Low Fog Effects Fluid, and has a fluid consumption rate of 100 ml/min. With a warm-up time of about 6 minutes, it's ready to use quickly. It supports manual, timer, and DMX 512 control with 1 DMX channel. The US model operates on AC 100 - 120V, 50/60Hz, while other models use different voltages. It has a specific start and rated current for each voltage option. The ambient temperature range for operation is 5°C - 40°C (41°F - 104°F). It connects via Neutrik Powercon for power and XLR 3 - pin and 5 - pin for DMX. Measuring L 780 W 608 H 715 mm (L 30.7 W 23.93 H 28.15 inch) and weighing 130 kg (286.6 lbs), it's a substantial yet powerful addition to any setup.
Using the Antari DNG - 250 is easy. First, make sure the machine is placed in an area where the ambient temperature is between 5°C and 40°C (41°F and 104°F). Fill the 10 - liter fluid tank with Antari FLL - 10 Low Fog Effects Fluid. Plug it into the appropriate power source according to your location's voltage. The US model uses AC 100 - 120V, 50/60Hz. Wait about 6 minutes for the machine to warm up. You can control the fog output manually, set a timer, or use DMX 512 control. If using DMX, connect it via XLR 3 - pin or 5 - pin. When using the machine, be aware of the start and rated currents for your voltage. For maintenance, regularly check the fluid level and refill as needed. Keep the machine clean and store it in a dry place when not in use. Make sure to follow all safety guidelines to ensure a long - lasting and safe operation.
