Product Description
The Chauvet DJ DMX-AN2 is a remarkable multipurpose Art-Net/sACN node interface. It can convert a single Ethernet cable into two DMX universes, which is incredibly useful for lighting setups. With optical and electrical isolation, it's ready to handle any situation. The durable Neutrik etherCON in/through port guarantees reliability, so you don't have to worry about signal loss. The built - in web - based GUI simplifies things a lot. You don't need to do any universe/subnet setup. And if the IP address changes, it automatically redirects the web page. This unit offers flexible power options, supporting Power over Ethernet (POE) or an external power supply. Both outputs can be configured to either Art - Net or sACN, and it functions as an Art - Net to DMX or DMX to Art - Net interface. The onboard LED indicators quickly show you the status, and the integrated mounting bracket allows for quick installation anywhere. Key Features: 1. Converts one Ethernet cable to two DMX universes. 2. Optical and electrical isolation for all situations. 3. No universe/subnet setup with the built - in web - based GUI. 4. Durable Neutrik etherCON port for reliability. 5. Automatic web page redirection on IP change. 6. Supports POE or external power supply. 7. Outputs configurable to Art - Net or sACN. 8. Functions as an Art - Net to DMX or DMX to Art - Net interface. 9. Onboard LED indicators for status. 10. Integrated mounting bracket for easy installation. Technical Specifications: DMX Channels: 1024; DMX Connectors: 3 - pin XLR; Input Voltage: (DC) 9 VDC, 500 mA (external power supply: 100 to 240 VAC, 50/60 Hz), (POE) 48V 0.4 A; Weight: 0.4 lb (0.2 kg); Size: 4.7 x 2.5 x 1.5 in (120 x 64 x 39 mm); Approvals: CE; Control Protocol: Art - Net, DMX, sACN; Art - Net Version: 3.
Using the Chauvet DJ DMX - AN2 is quite straightforward. First, connect your Ethernet cable to the Neutrik etherCON in/through port. You can choose to power it via Power over Ethernet (POE) or use an external power supply. If you use an external power supply, make sure to connect it properly according to the voltage requirements. Once powered on, the built - in web - based GUI will handle all the universe/subnet setup for you. You don't need to worry about any complicated configurations. You can set both outputs to either Art - Net or sACN depending on your needs. The onboard LED indicators will show you the status of the device at a glance. When installing, use the integrated mounting bracket to quickly place it in your desired location. As for maintenance, keep the device clean and free from dust. Avoid exposing it to extreme temperatures or moisture. If the IP address changes, the device will automatically redirect the web page, but you may need to access it again to check the settings. Also, when unplugging or plugging in cables, do it gently to avoid damaging the ports.
