The Dracast LED500 Tungsten Fresnel Light from the Fresnel Studio Series is a powerful lighting solution. It comes with a 4 - inch lens that can adjust the beam angle from 15 to 60 degrees, perfect for both flood and spot lighting. The surface - mounted LEDs have a high CRI of 95, ensuring accurate color reproduction. With a color temperature of 3200K, it offers a warm, tungsten - balanced light. You can dim it continuously from 0 to 100% using on - board controls or 5 - pin XLR connections. This light uses a silent passive heat sink cooling system, consuming only 50W of power while providing high output. It has a universal 110 - 240 VAC power supply and 36 VDC input, so it can work anywhere in the world. The durable aluminum construction comes with 4 - way barndoors and a mounting yoke with a 5/8 - inch baby pin receiver, allowing up to 90 - degree tilt. In the box, you'll get the light, 4 - way barndoors, a mounting yoke, an AC power cable, and a 1 - year limited warranty.
Using the Dracast LED500 Tungsten Fresnel Light is easy. First, connect the AC power cable to a 110 - 240 VAC power source. You can adjust the beam angle by moving the 4 - inch lens to get the right lighting effect, whether it's a narrow spotlight or a wide floodlight. To control the brightness, you can use the on - board controls or connect it via the 5 - pin XLR for more advanced dimming. When mounting the light, use the 5/8 - inch baby pin receiver on the mounting yoke. You can tilt it up to 90 degrees for different lighting angles. For maintenance, keep the light clean and avoid exposing it to excessive moisture as it has an IP20 rating. If there are any issues, refer to the limited 1 - year warranty for support.
