The American DJ ENTOUR FAZE 450W Fog Machine, part of the Entour Atmospherics Series, is a game - changer. It features ADJ's rapid heater technology, patented and pending. This tech allows the machine to start producing haze in just 40 seconds after you turn it on, as the heater maintains an optimized temperature. It uses standard water - based fog fluid, making it cost - effective and easy to find. With a haze output of 1000 cubic feet per minute, it quickly fills spaces. The fluid consumption is 10 ml per minute, and it has a 3 - liter tank capacity. For safety, there's an automatic circuit cut - off to protect the pump if the fluid tank runs dry. It offers 1, 2, or 4 - channel DMX mode and connects via 3 - pin XLR In/Out. Other features include a digital display with on - board controls, a power consumption of 465W, an on/off switch, a faze trigger switch, and a safety eye. It comes with a unique dual hanging bracket system for optimal positioning and a wired remote control with output volume adjustment, a red power - on LED, and a green ready indicator. Dimensions are 16.25” x 8” x 12” (414x202x303mm), and it weighs 10 lbs. (4.5 kg).
Using the American DJ ENTOUR FAZE 450W Fog Machine is a breeze. First, make sure the machine is on a stable surface. Fill the 3 - liter tank with standard water - based fog fluid. Then, turn on the machine using the on/off switch. Wait for about 40 seconds until the green ready indicator on the wired remote control lights up. Once ready, you can use the faze trigger switch to start the haze output. You can adjust the output volume via the remote control. For the DMX settings, choose between 1, 2, or 4 - channel mode according to your needs. When it comes to safety, always keep an eye on the fluid level. The machine has an automatic circuit cut - off to protect the pump if the fluid runs dry, but it's still a good idea to refill the tank in time. For maintenance, clean the machine regularly. Wipe the exterior with a soft cloth. After long - term use, check the heater and the pump for any signs of wear. If you're not using the machine for a while, store it in a dry place, and remove the fluid from the tank to prevent any damage.
