Product Description
Elevate your color - mixing experience with the ADJ Flat Par QWH5XS, a professional 'low - profile' LED lighting fixture. It comes equipped with five 5 - Watt QUAD LEDs (4 - in - 1 RGBW), enabling smooth RGB color mixing and the creation of true white and pastel hues. The fixture's low - profile design, sideways power and DMX Ins/Outs, and dual hanging brackets make it perfect for mobile entertainers, permanent installations, truss insertions, and uplighting.
This fixture offers 8 different DMX channel modes and can operate in Sound Active or Master/Slave modes. You can also control it wirelessly with the ADJ LED RC2 wireless remote (sold separately). Key features include 15 Color Macros, Electronic Dimming (0 - 100%), sideways IEC AC IN and OUT for daisy - chaining power, and a 25 - degree beam angle. The LEDs have a lifespan of 50,000 hours and each fixture only consumes 34 Watts of power.
Technical details: It's an ultra - bright, slim fixture with 5x 5 - Watt QUAD LEDs. The included Snoot Frame helps reduce unwanted light. Its unique'sit flat' design with sideways Power and DMX Ins/Outs allows it to be placed flat on the ground or inside trusses. It's great for performance stages where traditional par cans generate a lot of heat. With a low - profile case, it supports a wireless infrared remote control up to 15 ft./4.5M. It has multiple DMX and operational modes, smooth RGBW color mixing, no RGBW shadows, LED Pulse & strobe effects, and is flicker - free. It can be linked via 3 - pin XLR cable, has a 4 - button LED DMX display, and a dual - bracket yoke. It also comes with a gel frame for optional diffusion filters, has no duty cycle, and operates on multi - voltage (AC 100 - 240V, 50/60Hz). Dimensions are 10.75”x9”x4.5” / 272x230x115mm and it weighs 6 lbs. / 2.5 kg.
Using the ADJ Flat Par QWH5XS is a breeze. First, decide on the best location for your fixture. You can place it flat on the ground, hang it using the dual - bracket yoke, or insert it into a truss. If you want to use the wireless feature, get the ADJ LED RC2 remote (sold separately). To start, plug in the power using the sideways IEC AC IN outlet, and you can daisy - chain multiple units if needed. Connect the DMX cable via the sideways 3 - pin XLR In/Out if you're using DMX control.
When it comes to setting up the lighting effects, choose from 8 DMX channel modes and 6 operational modes. For simple color selection, use the Manual Color Mode. If you want a dynamic display, try the Color Fade or Auto (Program Run) modes.
Here are some important notes. Make sure to use the correct voltage (AC 100 - 240V, 50/60Hz) to avoid damage. Keep the fixture away from water and excessive heat. Don't touch the LEDs directly as it might affect their lifespan.
For maintenance, regularly check the cables for any signs of wear and tear. If the fixture gets dirty, use a soft, dry cloth to clean it. Avoid using harsh chemicals. With proper use and care, your ADJ Flat Par QWH5XS will serve you well for up to 50,000 hours.
