Product Description
The ADJ LED Remote Control is designed specifically for RGB par lighting fixtures. It offers a wide range of features to enhance your lighting experience. With the Black Out function, you can easily turn the fixture on or off. The Auto Run feature allows the fixture to automatically cycle through built - in programs. You can select specific programs, create a strobe effect with the Flash function, and control the speed of the Auto Run. The DMX Mode Select lets you customize the settings, and the Sound Active mode activates sound - reactive lighting. Designate a fixture as a 'Slave' in a Master/Slave setup. You can also set the DMX Address on a fixture. Adjust RGB colors using the dedicated RGB buttons and fine - tune flash rate, program selection speed, and Auto Run speed with the '+' and '-' buttons.
Using this ADJ LED remote control for your RGB par fixtures is a breeze. To turn the fixture on or off, just press the Black Out button. For automatic light shows, hit the Auto Run button. To pick a specific lighting program, use the Program Selection function. When you want a strobe effect, press the Flash button. You can control how fast the Auto Run goes with the Speed button. To switch between DMX modes, use the DMX Mode Select. If you want the lights to react to sound, activate the Sound Active mode. To set up a Master/Slave configuration, use the Slave button to make a fixture a 'Slave'. And don't forget to set the DMX Address using the Set Address button. When adjusting colors, use the RGB buttons and the '+' and '-' buttons to fine - tune. Remember to keep the remote dry and clean. If it gets dirty, use a soft, dry cloth to wipe it. Avoid exposing it to extreme temperatures and direct sunlight. Replace the batteries when the remote starts to work slowly or not at all.
