Product Description
The American DJ Mega Flash DMX 800W Strobe is a top - notch lighting solution. This 120VAC strobe is lightweight yet packs a powerful punch. With DMX control, you can easily adjust the flash rate from 1 to 15 flashes per second and the dimming from 0 to 100%. Link up to 16 units and control them with a single controller. Manual control is also available via the knobs on the rear. It even has a built - in sound - active mode that makes the flash sync with the music's beat. The built - in adjustable hanging yoke adds to its convenience. Key features include a bright 800 - Watt ZB - 800 lamp, adjustable flash and intensity rates, thermostat protection, a large coverage area, easy lamp replacement. Its technical specs are impressive too: a powerful 800W DMX strobe with a compact design, DMX - 512 protocol, 2 DMX channels for speed and dimming, speed and dimmer control knobs on the back, 0 - 100% dimming control, and a built - in microphone for sound activation. Dimensions are 4 x 15.5 x 8.5 inches (102 x 394 x 216mm) and it weighs 5 lbs. (2.2kgs).
Using the American DJ Mega Flash DMX 800W Strobe is easy. First, connect it to a 120VAC power source. You can control the flash rate and dimming either through the DMX controller or manually using the knobs on the rear of the unit. If you want the strobe to follow the music, just switch to the sound - active mode. When hanging the strobe, use the built - in adjustable hanging yoke. Make sure to place it in an area where it can cover as much space as possible. As for maintenance, keep an eye on the lamp. When it burns out, you can easily replace it with a ZB - 800 800W lamp. Also, the unit has thermostat protection, but try to keep it in a well - ventilated area to avoid overheating. Remember not to touch the lamp immediately after use as it will be very hot.
