The Antari DarkFX Strip 510 is a top - notch UV LED bar. It offers high output with low power consumption. At full intensity, it emits a peak wavelength of 365nm and a radiant flux output of 4500mW, with very little visible light. This means it can make all UV - reactive materials, art, amusement park displays, and signage shine with bright and vivid colors. Key features include high efficiency, a 25 - degree beam angle, a 365nm peak wavelength with minimal visible light, 4500mW high output at full intensity, special optics to prevent wear from high UV exposure, and flicker - free operation suitable for TV and film. Technical specs show it has (6) 1.9W high - power UV LEDs with an average 20,000 - hour LED life. It uses a DarkFX Drive 4 Power/DMX Fixture Driver (sold separately) and a 22 AWG Bare Wire Power/Data Combo Cable. Dimensions vary with and without mounting brackets, and it weighs 2.4 lbs (1.08 kg). It operates on DC 20 - 24V with a max power consumption of 12W and is approved for indoor use only (CE | IP20).
Using the Antari DarkFX Strip 510 is easy. First, connect it to the DarkFX Drive 4 Power/DMX Fixture Driver (which you'll need to buy separately) using the 22 AWG Bare Wire Power/Data Combo Cable. Then, power it on with a DC 20 - 24V power source. You're ready to illuminate your UV - reactive materials, art, or displays. When using it, keep in mind that it's only for indoor use, as it has an IP20 rating. Also, since it has high - power UV LEDs, don't look directly into the light for long periods. For maintenance, regularly check the cable connections to make sure they're secure. There's no need to replace the LEDs often, as they have an average life of 20,000 hours. Keep the bar clean and store it in a dry place when not in use.
