The Antari HZ-1000 is the top - notch haze machine in Antari’s HZ series. It offers single or twin - compressor modes, making it suitable for a wide variety of venues. The TFT color touch panel simplifies the setting process. When on tour, the wheeled - flight case adds protection and convenience. The built - in turbo fan projects the haze higher and farther, creating a drier haze with minimal residues. With a large fluid tank and an easy - to - see liquid level window, you can ensure your show runs smoothly. Technical details: US model has an input voltage of AC 100 - 120V, 50/60Hz 9.6A, rated power of 1150W, fluid consumption of 2.2 ml/min, a 6.4 - liter (1.69 - gallon) fluid tank, and is compatible with Antari HZL Haze Fluid. It can operate up to 40 hours at maximum output, works in an ambient temperature range of 0°C - 40°C (32°F - 104°F), and can be controlled manually, via timer, or DMX 512 with 2 DMX channels. It uses Neutrik TRUE 1 Connector for power and XLR 3 - pin and XLR 5 - pin for DMX. Dimensions are L690 W510 H610 mm (L27.16 W20.07 H24.01 inch) and weighs 74.6 kg (164.46 lbs).
Using the Antari HZ - 1000 is easy. First, make sure to fill the fluid tank with Antari HZL Haze Fluid. You can check the fluid level through the easy - to - see window. When setting it up, use the TFT color touch panel to choose between single or twin - compressor modes according to your venue needs. You can control it manually, set a timer, or use DMX 512. When connecting, use the Neutrik TRUE 1 Connector for power and XLR 3 - pin or XLR 5 - pin for DMX. Regarding safety, only use it in an ambient temperature between 0°C and 40°C (32°F - 104°F). For maintenance, regularly check the turbo fan for any blockages. After each use, it's a good idea to clean the machine to prevent residue build - up. And always store it in a dry place, preferably in the wheeled - flight case for protection.
