Introducing the AtmosFEAR Tour HZ, a top - notch 1,000W professional haze machine. Ideal for all - sized events, it can pump out up to 8,000 cubic ft. of continuous haze per minute. Setting it up is a breeze. Just fill the tank with water - based fluid, power it on, and after a 6 - minute warm - up, it's raring to go. You have the flexibility to set timed emissions or use the manual button for instant output. Key features include DMX controllability, an all - black tour - ready ATA - spec flight case, easy adjustments for haze output and blower speed, a timer with interval and duration settings, a 6 - button LCD control panel, a haze guide for directional control, 3 - channel DMX control, and a powerCON compatible power input connector. Technical specs: It measures 17.4 x 15.6 x 9.9 in. (44 x 39.5 x 25 cm) and weighs 29.8lbs (13.5kg). It has a 6 - button control panel with LCD display, 3 - channel DMX, 3/5 - pin XLR input/output. Operating modes are DMX - 512, master/slave, and standalone. It runs on AC110 - 120V 50/60Hz, with a 10A, 250V fuse and 1000W power consumption.
Using the AtmosFEAR Tour HZ haze machine is simple. First, fill the tank with water - based fluid. Then, connect it to a power source using the powerCON compatible connector. Let it warm up for 6 minutes. You can set timed interval and duration emissions on the 6 - button LCD control panel. Or, if you need instant output, just press the manual button. For more advanced control, use the 3 - channel DMX control. When using it, make sure the power supply matches the specified voltage (AC110 - 120V 50/60Hz). Also, don't forget to check the fuse regularly. To maintain it, clean the machine after each use. Keep the all - black ATA - spec flight case clean and dry to protect the machine during transportation. If you have any issues, refer to the technical specifications for troubleshooting.
