Product Description
The Ubiquiti EdgeSwitch 5XP is a high-performance, compact switch. It comes with five Gigabit Ethernet ports and supports passive 24V PoE output, allowing you to directly power devices over the network. This switch is perfect for small-scale network setups. It combines strong performance with energy efficiency, providing reliable connectivity and easy use for various devices like cameras and access points. Key features include five Gigabit Ethernet ports, passive 24V PoE passthrough, a compact and wall-mountable design, an easy management interface, and the ability to power network devices directly. Technical specs: Dimensions are 7.8' x 7.8' x 1.6' (197 x 87.5 x 27.3 mm), weight is 0.25 kg (8.8 oz), it has a MIPS 24K, 400 MHz processor, 64 MB system memory, 8 MB code storage, (5) 10/100/1000 Ethernet networking interfaces, (1) 10/100 Ethernet management interface, uses a 24V DC, 2.5A power adapter (included), max power consumption is 60W, PoE out voltage range is 22 - 24V DC, max PoE wattage per port is 11.5W, PoE method is passive, has a factory reset button, PoE is configurable per port (management port: N/A, data ports: Off/24V), LEDs for management port show power/link and for data ports show PoE, speed/link/activity. It operates in an ambient temperature range of -25 to 55° C (-13 to 131° F) and humidity of 10 to 90% noncondensing, and is certified with CE, FCC, IC.
Using the Ubiquiti EdgeSwitch 5XP is easy. First, connect the switch to a power source using the included 24V DC, 2.5A power adapter. Then, connect your network devices like cameras or access points to the five Gigabit Ethernet ports. You can use the passive 24V PoE output to power these devices directly over the network. The management interface is straightforward, allowing you to configure settings easily. When it comes to the PoE settings, for data ports, you can choose between Off and 24V. Just keep in mind that the management port doesn't support PoE configuration. As for maintenance, keep the switch in an environment with a temperature between -25 to 55° C (-13 to 131° F) and humidity of 10 to 90% noncondensing. If you need to reset the switch to its factory settings, use the factory reset button. Make sure to handle the switch gently and keep it clean to ensure long - term performance.
