Product Description
The Ubiquiti Switch Pro 24 (USW-Pro-24) is a top - notch 24 - port switch crafted for high - performance networks. It comes with two 1/10G SFP+ ports and 24 GbE RJ45 ports, offering a non - blocking throughput of 44 Gbps and a switching capacity of 88 Gbps. With Layer 3 functionality, it supports advanced routing and better security. The sleek SGCC steel enclosure and fanless design make it perfect for offices and data centers. This fanless switch runs quietly and handles heavy traffic with ease.
Key Features:
- 24 GbE RJ45 ports and 2 x 1/10G SFP+ ports
- Layer 3 switching with DHCP relay and inter - VLAN routing
- Advanced security features like 802.1X control and ACLs
- 44 Gbps non - blocking throughput and 88 Gbps switching capacity
- Fanless design for quiet operation and low energy use
- Supports DC backup power for high availability
Technical Specifications:
- Dimensions: 442 x 285 x 44 mm (17.4 x 11.2 x 1.7')
- Weight: 3.5 kg (7.7 lb) without brackets, 3.6 kg (7.9 lb) with brackets
- Enclosure Material: SGCC steel
- Management Interface: Ethernet In - Band
- Networking Interface: 24 GbE RJ45 ports, 2 1/10G SFP+ ports
- Total Non - Blocking Throughput: 44 Gbps
- Switching Capacity: 88 Gbps
- Forwarding Rate: 65.472 Mpps
- Power Method: Universal input (100 - 240V AC, 50/60 Hz), USP - RPS DC input (11.5V DC, 2.61A)
- Power Supply: AC/DC, internal, 36W
- Max. Power Consumption: 30W
- ESD/EMP Protection: Air: ± 16kV, contact: ± 12kV
- LCM Display: 1.3' touchscreen
- Button: Factory reset
- Shock and Vibration: ETSI300 - 019 - 1.4 Standard
- Ambient Operating Temperature: - 5 to 45° C (23 to 113° F)
- Ambient Operating Humidity: 10 to 90% non - condensing
- Certifications: CE, FCC, IC
Switching Features:
- Layer 2 features: IGMP snooping, STP/RSTP, Port isolation, Voice VLAN
- Layer 3 features: DHCP, Static routing, Inter - VLAN routing, Network isolation
- Port Features: LACP, Jumbo frames, Flow control, DHCP snooping/guarding
- Device isolation with ACLs, LLDP - MED
Package Contents:
- Ubiquiti Switch Pro 24
- Power Adapter
- Mounting Kit
- Quick Start Guide
Using the Ubiquiti Switch Pro 24 is a breeze. First, find a suitable location for it, whether it's in an office or a data center. Make sure the area has proper ventilation and is within the recommended temperature and humidity range (-5 to 45° C and 10 to 90% non - condensing).
To set it up, connect the switch to a power source using the provided power adapter. You can choose either the AC input (100 - 240V AC, 50/60 Hz) or use the DC backup power if needed. Then, connect your network devices to the 24 GbE RJ45 ports or the 2 x 1/10G SFP+ ports according to your network requirements.
When it comes to configuration, use the Ethernet In - Band management interface. You can set up advanced features like Layer 3 routing, DHCP relay, and security settings such as 802.1X control and ACLs.
Here are some important notes. Avoid exposing the switch to extreme temperatures or high humidity as it can damage the internal components. Also, keep the switch away from sources of static electricity as it has ESD/EMP protection, but excessive static can still cause issues.
For maintenance, since it has a fanless design, there's no need to worry about fan cleaning. However, you should periodically check the physical connections to make sure they are secure. If you need to reset the switch to its factory settings, simply press the factory reset button.
