The ADJ Airstream WiFi Bar 4-Channel Switch Controller is a must - have wireless device. It enables you to control the four outlets (ON/OFF) of the Airstream WiFi Bar right from your iPhone or iPad. This device creates its own private standalone WiFi network, so you don't need an existing network infrastructure. Once you connect the Airstream WiFi Bar to the Airstream WiFi iOS app's wireless network, you can switch the four outlets on and off manually or automatically. With a 2.4 GHz wireless frequency, it can coexist in busy RF environments with Bluetooth and other WiFi networks. Ideal for mobile entertainers, nightclubs, bars, and production events where you want to avoid visible data or power cables. It comes with a WiFi antenna, 4 Edison output sockets, a power indicator LED, a primary/secondary switch, and an on/off switch. Key features include a 4 - channel WiFi switch bar, 8A/960W per channel with a 1,800W max, an intuitive iOS app, a passcode - protected WiFi network, and the ability to rename channel names. Technical specs: power consumption is 7.7W, voltage is AC 100 - 240V, 50/60Hz, total max loading is 15A/1,800W, single - channel loading is 8A/960W, WiFi frequency is 2.4GHz 802.11b, working humidity is <85%RH, working temperature is 0 - 55 degrees, and it has over 50,000 max on/off cycles. It's cETLus approved with control #5004962 and has dimensions of 26.0” (L) x 5.6” (W) x 3.6” (H) / 660mm x 141mm x 91mm.
Using the ADJ Airstream 4 - Channel WiFi Bar Switch Controller is easy. First, make sure to connect the device to the Airstream WiFi iOS app's wireless network. After that, you can use your iPhone or iPad to control the four outlets, either turning them on and off manually or setting up automatic switching. Remember, this device creates its own private WiFi network, so you don't need an existing network. When it comes to power, the voltage range is AC 100 - 240V, 50/60Hz, and the total max loading is 1,800W. Don't exceed the single - channel loading of 8A/960W. The working temperature is between 0 and 55 degrees, and the humidity should be less than 85%RH. Keep in mind that the WiFi network is passcode - protected, so safeguard your passcode. For maintenance, just keep the device clean and dry. Avoid exposing it to extreme conditions. If you have any issues, refer to the cETLus approval information with control #5004962 for further assistance.
