The ADJ COB Cannon LP200ST is an amazing and highly versatile professional wash lighting fixture suitable for a wide range of uses. It utilizes a super - efficient 200 - Watt COB (Chip on Board) RGBAL (red, green, blue, amber, and lime) LED light source. This light source produces a strong and even output without any color shadows. By combining red, green, blue, amber, and lime LED chips, it can create a vast array of colors and white light with a color temperature ranging from 2300K to 9900K. The lime LED chip makes certain colors look more vivid and boosts the CRI above 90. With a wide native beam angle of 80 degrees, it can wash a large area with bright colored light. It comes with a useful lens kit that includes 40 - degree and 50 - degree lens options. You can easily clip these lenses to the front of the fixture to get a narrower beam when needed. For seamless integration into an existing control system, the unit has both 3 - pin and 5 - pin DMX input and output sockets on its rear panel. There are also locking power input and output sockets, allowing you to connect up to three fixtures to a single power outlet. It comes with a flexible scissor yoke that can be used as a hanging bracket or a floor stand. Barn doors for directing the light output are available as an optional accessory.
**Key Features**
- Light Source: 1x 200 - Watt COB RGBAL LED Engine
- Primary / Secondary Mode
- Flicker - free operation (no flickering on camera)
- Powerful and smooth RGBAL color mixing with rich color palettes
- Scissor yoke for mounting on truss or setting on the ground
- Optional Barn Doors (BAR001) sold separately
**Technical Specifications**
**OPTICAL**
- Light Source: 1x 200 - Watt COB RGBAL LED Engine
- LED Engine Life Rating: Approximately 50,000 hrs.
- CRI: >90
- Color Temperature: 2300 - 9900K
- 80 - degree beam angle, lens kit to change to 40 - or 50 - degree beam angle
**FEATURES**
- Primary / Secondary Mode
- Flicker - free operation
- Powerful RGBAL color mixing
- Scissor yoke for mounting
- Optional Barn Doors sold separately
**CONTROL**
- 10 DMX Channel modes
- Linear color temperature control via DMX
- Built - in color temperature presets via DMX
- 64 built - in color macros
- 4 - button OLED digital DMX display on rear panel
- Compatible with the ADJ UC IR remote control (included)
- LED pulse and strobe effect
**Electronic Dimming**
- 0 - 100%
- 6 selectable Dim Modes
- 4 selectable Dim Curves
- Adjustable selectable Refresh Rate (14 presets from 900 - 25,000Hz)
**CONNECTIONS**
- 3 - pin & 5 - pin XLR connectors for DMX data linking
- Indoor locking power in & Out connections for daisy - chaining power
- USB Service Port
**ELECTRICAL**
- Auto - sensing power supply: AC 100V/60Hz - 240V/50Hz
- Power Draw: 175W max
- Daisy chain up to 7 fixtures (120V) or 14 fixtures (230V) maximum
**DIMENSIONS / WEIGHT**
- Dimensions (LxWxH): 13” x 10” x 7.5” / 330x256x190mm (With bracket); 8.75” x 7.5” x 7.5” / 218.5x190x190mm (Without bracket)
- Weight: 9.26 lbs. / 4.2 kg.
**WHAT’S INCLUDED**
- (1) 50 - degree lens
- (1) 40 - degree lens
- UC IR Wireless Remote
- Power Cord
- Scissor Yoke
**ACCESSORIES**
- BAR001 - COB Cannon Wash Barn Doors
**RATING / APPROVALS**
- cETLus Approved (#4002034)
Using the ADJ COB Cannon LP200ST is a breeze. First, connect the power cord to a suitable power outlet. The fixture has locking power sockets, so you can even connect up to three fixtures to one outlet. If you want to control it with a DMX system, use the 3 - pin or 5 - pin XLR connectors on the rear panel. You can also use the included ADJ UC IR remote control for easy operation. To change the beam angle, simply clip the 40 - degree or 50 - degree lenses from the lens kit onto the front of the fixture. The scissor yoke can be used to mount the fixture on a truss or place it on the ground. For directing the light output more precisely, you can buy the optional BAR001 barn doors separately.
When it comes to maintenance, keep the fixture clean. You can use a soft, dry cloth to wipe it. Avoid using harsh chemicals as they may damage the surface. The LED engine has a long life of about 50,000 hours, but if you notice any issues with the light output, check the connections first. Also, make sure to store the fixture in a dry and cool place when not in use. The power supply is auto - sensing, so it can work with different voltages from 100V/60Hz to 240V/50Hz. Just be careful not to overload the power circuit when daisy - chaining multiple fixtures.
