The Blizzard Lighting Verismo Fresnel RGBALC 300W high-output LED light is a top - notch lighting solution for theater, video, and production studios. Powered by a 300W RGBALC LED module, it delivers high - intensity light. Its advanced RGBALC color - mixing system provides multiple control options. You can enjoy 16 - bit fine dimming for each individual RGBALC color, two dedicated HSIC (hue, saturation, intensity, color temperature) control modes, and easy access to 2400K - 6500K white CCT presets. Key features include a 300W RGBALC LED light source, RGBALC + HSIC color mixing, a wide CCT range from 2400K - 6500K, 16 - bit dimming with 4 selectable dimming curves, adjustable refresh rates (1000 - 8000 Hz), user - selectable dimming speeds, 18 - 65 degrees motorized zoom, 1 - 25Hz strobe effects, a 200mm (8 - inch) Fresnel lens, a 10 - inch single - slot frame/barndoor holder, an aluminum black housing, PowerCON TRUE1 compatible in/out, and 3/5 - pin male/female XLR input & output. Technical specs show it has a high CRI of 96, flicker - free resolution, dimensions of 17” x 12” x 18” (430 x 303 x 457 mm) and weighs 21 lbs. (9.5 kg). It supports DMX and RDM protocols, has a 4 - button menu with an OLED display, and operates on 100 - 240VAC, 50 - 60 Hz with a power consumption of 294W 2.56A, PF:.99. It comes with a 2 - year limited warranty and is cETLus certified.
Using the Blizzard Lighting Verismo Fresnel RGBALC 300W LED light is a breeze. First, connect the power using the PowerCON TRUE1 - compatible input, making sure the power supply is within 100 - 240VAC, 50 - 60 Hz. Then, use the 3/5 - pin DMX in/out to connect it to your control system. You can control the light's color, brightness, and other settings through the 4 - button menu with an OLED display. For color settings, take advantage of the RGBALC + HSIC color - mixing system. You can set individual RGBALC colors with 16 - bit fine dimming or use the dedicated HSIC control modes. When adjusting the zoom, the motorized zoom function allows you to easily change the beam angle from 18 to 65 degrees. As for strobe effects, you can set the frequency from 1 - 25Hz. When it comes to maintenance, keep the light clean by gently wiping the aluminum housing with a soft, dry cloth. Avoid using harsh chemicals as they may damage the finish. Also, make sure the ventilation areas are clear to prevent overheating. If you have any issues, refer to the 2 - year limited warranty for support.
