The Dracast LED1000 Plus Series Daylight 2-Light Kit is a great choice for image makers working on location or in the studio. It comes with two 12x12” LED1000 Plus Daylight LED Panels. Each panel has a multi-voltage power supply, its own case, and a light stand. The LED1000 Plus Series Daylight LED Lights feature a digital display for easy output adjustment and Cat5 DMX input/output for linking. They come with both Gold mount and V-mount battery plates. With 1024 LEDs and a high CRI of >95, these lights offer excellent color accuracy. They have a daylight-balanced color temperature of 5600K, perfect for matching natural light. The lights have a 45° spot beam angle and can be dimmed from 0-100%. They can run on a DC source like a Gold or V-mount battery or a 100-240 VAC adapter. Made with an aluminum chassis, frame, and mounting yoke, they are durable and only consume 60W of power. They are lightweight at 5.5 lb and measure 12 x 12 x 2”. The DLS-805 Spring-Cushioned Light Stands extend from 28.5” to 72” and have a 13 lb load capacity. They fold down to 28.5” for easy transport and weigh 3.4 lb. They have a 5/8” stud on top, are made of lightweight aluminum, anodized to reduce reflections, and spring-cushioned to protect fixtures. The kit includes two LED1000 Plus Daylight LED Lights with V-Mount Battery Plates, two DLS-805 Spring-Cushioned Light Stands, a limited 1-year warranty. Technical specs include a color temperature of 5600K, CRI 95, no cooling system or display, RJ45 DMX input/output, TVMP/Hex Bolt yoke mount, 5/8' fixture mount, and IP20 rating.
Using this Dracast light kit is easy. First, set up the DLS-805 light stands. Unfold them and adjust the height according to your needs using the large, easy - to - grip knobs. Make sure the stands are stable before attaching the light fixtures. Then, attach the LED1000 Plus Daylight LED Panels to the stands using the 5/8” stud on top of the stands. You can power the lights in two ways. You can use a DC source like a Gold or V - mount battery, or a 100 - 240 VAC adapter. Once powered, use the digital display on the lights to adjust the output. You can also link multiple lights using the Cat5 DMX input and output. When it comes to dimming, you can set the lights anywhere from 0 - 100%. As for color, with a color temperature of 5600K and a high CRI of >95, you'll get excellent color accuracy that matches well with natural light. For maintenance, keep the lights and stands clean. Wipe them with a soft, dry cloth. Store the lights in their individual cases when not in use to protect them. The stands should be folded down and stored in a dry place. Remember, this kit comes with a limited 1 - year warranty, so if you have any issues, contact the manufacturer.
