The EtherWAN EX73934X-0VB is a top - notch, hardened DIN - rail mounted managed Ethernet switch. It belongs to the EX73900X series, which offers high flexibility, speed, and reliability for crucial networks in urban infrastructure, transportation, security, and power substations. This switch comes with up to 12 gigabit Ethernet ports and 4 dual - rate 10 gigabit SFP+ ports, and supports the IEEE1588v2 Precision Time Protocol for network time synchronization. Key features include high - bandwidth 10/100/1000BASE - T(X) ports, 10 - gigabit fiber SFP+ uplink ports, full - duplex full - capacity switching. It's designed for non - ventilated and harsh environments with a wide operating temperature range from - 40 to 75°C. It has no fan, high resistance to impact, thermal shock, and electrical noise. It also offers lite Layer 3 functionality, redundancy with VRRP, and reduces broadcast traffic. It's certified for power substation (IEC 61850 - 3/IEEE 1613), NEMA TS2 rated, and UL certified for safety. Management features include port control, SFTP, and dying gasp SNMP trap. It can be configured and monitored with eVue™ and eLite™ network management tools. Technical specifications cover Ethernet ports, console, config backup, digital input, alarm contact, LED indicators, and a wide range of standards. It has a 2Gb DDR3 SDRAM system memory, 1Gb flash storage, 12 - 48VDC redundant power input, and a maximum power consumption of 20W. It comes with reverse polarity protection, an aluminum casing, IP30 rating, and DIN - rail mounting. Enjoy complimentary technical support, free firmware upgrades, and a limited lifetime warranty.
Using the EtherWAN EX73934X - 0VB Ethernet switch is straightforward. First, mount it on a DIN - rail using the provided mounting brackets and screws. Connect the power supply using the 12 - 48VDC redundant terminal block. Make sure to check the power polarity to avoid reverse polarity issues. Then, connect your devices to the appropriate Ethernet ports, whether it's the 10/100/1000BASE - T(X) ports for general devices or the SFP+ ports for high - speed fiber connections. You can use the eVue™ or eLite™ network management tools to configure and monitor the switch. Just follow the on - screen instructions to set up features like port control, static routing, etc. When it comes to maintenance, since it's a fanless device, there's no need to worry about cleaning fans. But it's a good idea to keep the switch in a clean environment. If you need to backup the configuration, use the USB port. Also, regularly check the LED indicators to monitor the power status, port link/activity, and alarm conditions. If you face any issues, you can reach out for the complimentary technical support. And don't forget to take advantage of the free firmware upgrades to keep your switch running smoothly. The switch has a wide operating temperature range, but try to keep it within the recommended - 40 to 75°C range for optimal performance.
