Ubiquiti Switch Pro Max 48: The Premier High - Performance Network Solution
The Ubiquiti Switch Pro Max 48 offers top - notch Layer 3 network management. It's incredibly versatile and powerful. With 48 RJ45 ports and four 10G SFP+ uplinks, it supports advanced enterprise - level features. The Etherlighting™ feature helps you easily identify ports, and the intuitive LCM touchscreen display makes management a breeze. Its sturdy build and efficient power management make it perfect for tough environments where you need scalability, high - speed performance, and reliability.
Key Features
- 48 ports, including 16 1/2.5 GbE and 32 GbE RJ45 ports for diverse connectivity.
- Supports both Layer 2 and Layer 3 network functions for comprehensive networking.
- 1.3' touchscreen simplifies the management process.
- Advanced power options with AC/DC and RPS DC inputs for flexible power supply.
- Scalable UniFi integration ensures smooth and efficient operation.
Technical Specifications
Mechanical
Dimensions: 442 x 325 x 44 mm (17.4 x 12.8 x 1.7')
Weight: Without mounting brackets: 4.8 kg (10.6 lb); With mounting brackets: 4.9 kg (10.8 lb)
Enclosure material: SGCC steel
Hardware
Management interface: Ethernet In - Band
Networking interface: (32) GbE RJ45 ports, (16) 1/2.5 GbE RJ45 ports, (4) 10G SFP+ ports
Total non - blocking throughput: 112 Gbps
Switching capacity: 224 Gbps
Forwarding rate: 166.656 Mpps
Power method: (1) Universal input, 100–240V AC, 50/60 Hz; (1) USP - RPS DC input
Power supply: AC/DC, internal, 100W
Supported voltage range: 100–240V AC
Max. power consumption: 100W
LCM display: 1.3' touchscreen
Button: Factory reset
Ambient operating temperature: -5 to 40° C (23 to 104° F)
Ambient operating humidity: 10 to 90% non - condensing
Certifications: CE, FCC, IC
Switching Features
Layer 2 features: IGMP snooping, STP/RSTP, port isolation, storm control, voice VLAN, port mirroring, LACP, multicast/broadcast rate limiting, MAC address blocking, flow control, 802.1X control, jumbo frames, proprietary loop protection, DHCP snooping/guarding, egress rate limit, LLDP - MED, port restricted by MAC, device isolation with ACLs
Layer 3 features: DHCP for locally - managed networks, DHCP relay, inter - VLAN routing, static routing, network isolation with ACLs
Etherlighting™: Ethernet locating, speed/link, native VLAN/network; SFP+ locating, speed/link, native VLAN/network
LEDs: System (status), RPS (status)
Application Requirements
UniFi Network: Version 8.0.24 and later
Using the Ubiquiti Switch Pro Max 48 is straightforward. First, find a suitable location for the switch. Make sure the ambient temperature is between -5 and 40° C and the humidity is between 10 to 90% non - condensing. You can connect the switch to the power supply using either the universal 100 - 240V AC input or the USP - RPS DC input. Once powered on, use the 1.3' touchscreen to configure the settings. You can easily set up Layer 2 and Layer 3 features as needed. For port identification, take advantage of the Etherlighting™ feature. When connecting devices, use the 48 ports available, including the 16 1/2.5 GbE and 32 GbE RJ45 ports, and the four 10G SFP+ uplinks. Keep in mind that the UniFi Network version should be 8.0.24 or later. As for maintenance, regularly check the switch for any signs of overheating or unusual noises. Make sure the ventilation is not blocked. If you need to reset the switch to its factory settings, simply press the factory reset button. And always ensure that the power supply is stable to avoid any damage to the switch.
