Product Description
The Ubiquiti USW-Aggregation is an amazing 8-port Layer 2 network switch crafted for high-performance network setups. It comes with 10G SFP+ ports and an outstanding throughput of 80 Gbps, enabling efficient data aggregation for large-scale deployments. Its fanless design and robust internal power supply offer reliable performance for critical applications with a small footprint. This switch is perfect for handling high volumes of data traffic in high-speed networks. Key features include 8 x 10G SFP+ ports for high-speed links, 80 Gbps non-blocking throughput for smooth data transfer, a fanless design for quiet operation, and Layer 2 switching with advanced features like LACP and IGMP snooping. Technical specs: Dimensions are 17.4 x 4.7 x 1.7 inches (442 x 120 x 43.7 mm), weighs 5.8 lbs (2.6 kg) without brackets and 6 lbs (2.7 kg) with brackets. It has (8) 10G SFP+ ports, a total non-blocking throughput of 80 Gbps, a switching capacity of 160 Gbps, a forwarding rate of 119.04 Mpps, and uses a universal AC input (100–240V AC, 50/60 Hz) with a max power consumption of 30W. The power supply is internal AC/DC, 36W, and it supports a voltage range of 100–240V AC. It also has ESD/EMP protection (Air: ± 16kV, Contact: ± 12kV), a 1.3' color touchscreen LCM display, and operates at -5 to 40° C (23 to 104° F) with 10 to 90% non-condensing humidity. Certified with CE, FCC, IC. Switching features involve IGMP snooping, STP/RSTP, port isolation, storm control, voice VLAN, port mirroring, LACP port aggregation, multicast/broadcast rate limiting, 802.1X control, jumbo frames support, MAC address blocking, and flow control. Application requires UniFi Network Version 5.14.12 or later.
Using this Ubiquiti switch is quite straightforward. First, make sure your network meets the application requirement of UniFi Network Version 5.14.12 or later. Then, connect your devices to the 10G SFP+ ports. The switch will handle data aggregation and transfer efficiently. When it comes to placement, keep in mind the operating temperature range of -5 to 40° C and humidity of 10 to 90% non-condensing. Avoid placing it in areas with extreme temperatures or high moisture. For maintenance, since it has a fanless design, there's no need to worry about cleaning fans. But it's a good idea to keep the switch in a clean environment to prevent dust accumulation. Also, check the power supply regularly to ensure it's working properly. If you notice any issues like sudden drops in performance or strange noises, refer to the official documentation or contact Ubiquiti support.
