The ADJ Fog Fury 2000 is an amazing 1100W portable fog machine with cutting - edge technology. Its special heating element design uses an oil - type transmission in the pipeline to avoid clogging. The high - performance pump system ensures great output. With ADJ’s Electronic Thermo Sensing (ETS) technology, it maintains the best heat levels without any warm - up time between fog blasts. The LED heating indicator system is very handy. It shows red when heating, green when ready, and flashes when the fog fluid is low. This fogger pumps out 7000 cubic feet of fog per minute. It has a 2.5 - liter external tank and only needs 8 minutes to warm up. It uses water - based fog fluid only. Key features include an automatic circuit cut - off to protect the pump when the tank is dry, a single yoke for easy mounting, a convenient carrying handle, and an On/Off wired remote control with a 25 - foot cable. Technical specs: 1100W heater, 1200W max power consumption, AC 120V/60Hz or 230V/50Hz (non - switching), dimensions of 16.75” x 11.75” x 9” (421 x 295 x 224mm), and a weight of 16 lbs (6.89 kg).
Using the ADJ Fog Fury 2000 is easy. First, make sure you use water - based fog fluid and fill the 2.5 - liter external tank. Plug it in, and the LED will turn red while it's heating up. After about 8 minutes, when the LED turns green, it's ready to use. You can control it with the On/Off wired remote control that comes with a 25 - foot cable. Remember, this machine has an automatic circuit cut - off to protect the pump if the fog fluid tank runs dry. Always keep an eye on the LED. If it starts flashing, it means the fog fluid is low and you should refill it. For maintenance, make sure to clean the machine regularly. Check the pipeline for any signs of clogging, as the special heating element design helps reduce this risk but it's still good to be cautious. Store the machine in a dry place when not in use.
