The Blizzard Lighting 2-Fer is a remarkable device that combines a 2-way power splitter and a 2-way DMX splitter in one convenient unit. It's perfect for any scenario where powerCON power cables and DMX cables are often used. It also pairs excellently with Blizzard's DMX-PC combo cables. These units are built to last and are highly reliable, making lighting setups much easier! The 2-Fer units come with 1x 20A powerCON compatible input and 2x 20A powerCON compatible flush - mounted outputs. You can choose between 3 - pin (2 - FER - 3PIN) or 5 - pin (2 - FER - 5PIN) DMX connectors, each with 1 signal input and 2 signal outputs. The DMX connectors are 100% optically isolated, and there's a built - in 120 Ohm terminator/pass thru switch to complete the DMX chain properly. Key features include 1x DMX signal input, 2x DMX signal outputs, 1x powerCON compatible input, 2x powerCON compatible outputs, optically isolated XLR connectors, flush - mounted power connectors, 5 - pin XLR connectors, a 120 Ohm terminator/pass thru switch, 12/14 AWG internal wiring, output power/signal LED status indicators, a steel housing, a threaded clamp mounting hole (M10), and it's well - built and highly reliable. Technical specs: Length is 5.4 inches (136 mm), depth is 3.3 inches (82 mm), height is 3.5 inches (88 mm), and it weighs 2.5 lbs (1.1 kg). It operates at 110 - 240VAC, 50 - 60 Hz.
Using this Blizzard Lighting splitter is easy. First, connect your power source to the 20A powerCON compatible input. Then, plug your devices into the two 20A powerCON compatible outputs. For the DMX part, connect your DMX signal source to the DMX input. You can then connect up to two DMX - enabled devices to the two DMX signal outputs. Make sure to set the 120 Ohm terminator/pass thru switch correctly to complete the DMX chain. When it comes to maintenance, keep the unit in a dry and clean place. Avoid exposing it to extreme temperatures. Check the LED status indicators regularly to ensure the power and signal are working properly. If you notice any issues with the connectors or the wiring, have a professional check it out.
