The Blizzard Lighting SnowBlind LED Strobe is an ultra - cool and ultra - bright white LED fixture. It's equipped with 18 high - power 1W cool white LEDs, delivering an incredibly bright light. You can adjust the brightness, strobe rate, and microphone sensitivity easily. Use 3 channels of DMX or the 4 - button LED control panel menu for full control. Manually adjust sound sensitivity with the knob on the rear. Take advantage of the wiCICLE® wireless DMX system without extra power, as it gets power directly from the fixture's DMX jack, reducing cords and setup time. It can work in standalone mode or be linked in Master/Slave mode, consuming only 25W per unit. Packed in a light - weight black aluminum housing with a single mounting bracket and dual locking knobs for easy installation. It's a feature - rich, bright white LED strobe ready to use right out of the box. Key features include being powered by 18 1 - watt white LEDs, variable strobe and dimmer, 3 - channel DMX and master/slave control, sound active mode, microphone sensitivity adjustment, a user - friendly 4 - button menu, an aluminum mounting bracket with locking knobs, and the ability to power the wiCICLE® wireless system via DMX. Technical specs: 18 1 - Watt Cool White LEDs with 100,000 hours lifespan, 20fps max strobe rate, AC100V/240V 50/60Hz operating voltage, 25W power consumption, 15 - degree beam angle, max operating temp of 104°F (40°C), USITT DMX - 512 protocol, 3 DMX channels, 3 - pin XLR male input and female output, and various operating modes. Dimensions are 12.59' (32 cm) x 5.51' (14 cm) x 3.54' (9 cm) and it weighs 3.52 lbs (1.6 kg), with a 2 - year limited warranty (excluding LED damage).
Using the SnowBlind LED strobe is a breeze. If you want to use it in standalone mode, just plug it in and use the 4 - button LED control panel menu to adjust settings like brightness, strobe speed, and microphone sensitivity. For more advanced control, connect it to a DMX system using the 3 - pin XLR male input. You can use 3 channels of DMX to control all the functions. If you have multiple units, link them in Master/Slave mode to create a great strobe effect. When using the wiCICLE® wireless DMX system, you don't need external power as it gets power from the fixture's DMX jack. Just make sure to adjust the sound sensitivity with the knob on the rear if you want to use the sound - active mode. For installation, use the single mounting bracket and dual locking knobs on the black aluminum housing. Make sure to install it in a place where the ambient temperature doesn't exceed 104°F (40°C). When it comes to maintenance, keep it clean and dry. Don't touch the LEDs with dirty hands as it might damage them. The warranty doesn't cover malfunctions caused by LED damage, so handle it with care. Also, always use the correct operating voltage (AC100V/240V 50/60Hz) to avoid any electrical issues.
