Ubiquiti WiFi BaseStation XG Tri - radio AP with 12 Spatial Streams
The Ubiquiti WiFi BaseStation XG (UWB - XG) is a powerhouse. Its tri - radio WiFi 5 setup is a game - changer for large, high - density areas. With 12 spatial streams and an adjustable antenna array, it can cover over 5,000 square feet effectively. Whether it's a small office or a large venue, its 1GbE and 10GbE uplinks ensure high - speed data transfer. Being weatherproof with an IP67 rating, it can handle tough outdoor conditions. And thanks to PoE++ power, installation is a breeze, providing top - notch reliability in high - traffic spots.
Key Features:
- Tri - radio WiFi 5 with 12 spatial streams for excellent performance
- Adjustable antenna for up to 5,000+ ft² coverage
- 1GbE and 10GbE uplinks for fast data
- Weatherproof (IP67) for outdoor use
- Supports up to 1,500 concurrent clients
- PoE++ for easy installation
Technical Specifications:
Dimensions: 18.6 x 10.1 x 3.7 inches (471.1 x 257.5 x 94.3 mm)
Weight: 7.1 lbs (3.2 kg)
Weatherproofing: IP67
Networking Interface: (1) GbE RJ45 port, (1) 1/10 GbE ICM Ethernet port
Management Interface: Ethernet, Bluetooth
Power Method: PoE++
Power Supply: 50V DC, 1.2A (Gigabit PoE++ adapter included)
Max. Power Consumption: 31W
Max. TX Power: 25 dBm (5 GHz)
MIMO: 4x4 (Low/Mid/High - band)
Max. Data Rate: 1.7 Gbps (5 GHz BW80)
Antenna Gain: 15 dBi (Small cell, 2.4/5 GHz)
Antenna: Integrated dual - mode antenna array
Operating Frequency: 5 GHz low, mid, and high bands (Ch 36 - 64, 100 - 132, 149 - 165)
Antenna Beamwidth: 50° (Small cell), 90° (Large cell)
LEDs: R/G/B indicators
Button: Factory reset
Mounting: VESA - compatible, pole/wall mount (brackets included)
Operating Temperature: - 40 to 70°C (- 40 to 158°F)
Operating Humidity: 5% to 95% non - condensing
Certifications: CE, FCC, IC
Software Features:
- WiFi Standards: 802.11 a/b/g/n/ac
- Wireless Security: WPA - PSK, WPA - Enterprise, 802.11w/PMF
- VLAN Support: 802.1Q
- Advanced QoS: Per - user rate limiting
- Beamforming and WMM supported
- Guest Traffic Isolation: Supported
- Concurrent Clients: 1500+
Package Contents:
- Ubiquiti WiFi BaseStation XG
- Gigabit PoE++ Adapter
- Mounting Bracket
- Quick Start Guide
Using your Ubiquiti WiFi BaseStation XG is easy. First, take it out of the box. You'll find the base station, a Gigabit PoE++ adapter, a mounting bracket, and a quick - start guide. Connect the base station to the power using the PoE++ adapter. Then, use the mounting bracket to install it on a wall or a pole as per your need. You can adjust the antenna array to get the best coverage for your space. Remember, it can cover up to 5,000+ square feet. For outdoor use, it's weatherproof, but make sure it's not in direct contact with standing water. When it comes to maintenance, keep it clean and free from dust. Check the LEDs regularly to make sure it's working properly. If you need to reset it, press the factory reset button. And don't forget to keep it within the operating temperature range of - 40 to 70°C and humidity between 5% to 95% non - condensing.
