Product Description
The TRENDnet TPE-113GI is a top - notch Gigabit Power over Ethernet (PoE) injector. It ingeniously combines electrical power with a Gigabit network connection to generate a PoE signal. Connect it to a non - PoE switch and then you can run an Ethernet cable up to 100 meters to reach network PoE devices. When installing TRENDnet PoE access points and IP cameras in remote areas, you don't need to buy a new PoE switch. Just use an existing open port on a non - PoE switch, which helps save on installation and equipment costs. This compact device has short - circuit protection to safeguard your valuable network equipment. You can quickly set up an integrated PoE and non - PoE network at Gigabit speeds. Key features include IEEE 802.3ab Gigabit and 802.3af PoE compliance, a long - range PoE signal delivery up to 100 meters, auto - MDIX data ports, a power port, a power LED indicator, and it can supply up to 15.4 Watts of power. It's easy to install in places without power outlets, reduces costs, and is plug - and - play in remote locations. With its light weight, compact size, and wall - mounting points, it's a great choice for your network needs. Technical specs cover standards, network media, data lines, power input and output, power consumption, dimensions, weight, and what's included in the package.
Using the TRENDnet TPE-113GI PoE injector is quite simple. First, connect the injector to a non - PoE switch using the 10/100/1000Mbps Auto - MDIX Data In port. Then, take an Ethernet cable and connect it to the 10/100/1000Mbps PoE Auto - MDIX Data Out port of the injector. You can run this cable up to 100 meters to reach your PoE devices like access points or IP cameras. Plug the power adapter into the power port of the injector and connect it to a power source. The power LED indicator will show if the device is powered on. When using, make sure the power input voltage is within 100 - 240V and the frequency is 50 - 60Hz. Don't exceed the maximum power consumption of 15.4 Watts. For maintenance, keep the device in a dry and cool place. If you notice any issues like short - circuit, turn off the power immediately and check the connections. You can clean the device with a dry cloth to remove dust. That's all you need to know to use and take care of your TRENDnet TPE - 113GI PoE injector.
