The ADJ Data Distro 6 is a super - versatile and compact data splitter crafted for smooth DMX512 and RDM signal distribution. It's a must - have for lighting pros, seamlessly integrating into professional lighting systems. This splitter guarantees reliable data transfer across multiple devices, and it's a great helper for efficient and organized cable management.
It comes with one 5 - pin XLR input, one 5 - pin XLR thru, and six 5 - pin XLR outputs, making it a breeze to distribute DMX and RDM signals. The sturdy physical design offers flexibility with a truss mount that can use Velcro straps or an M10 screw clamp (clamp not included), fitting various rigging needs.
The unit features a link out termination switch and a DMX/RDM protocol switch, giving you more control over signal routing and compatibility. With an indoor locking power socket and power input protection via a T1.25A/250 fuse, it operates safely and reliably. Its small size and light weight make it perfect for both fixed installations and mobile setups.
**Key Features**:
- 6 - way DMX and RDM data splitting
- One 5 - pin XLR input and one 5 - pin XLR thru
- Six 5 - pin XLR outputs
- Link out termination switch
- DMX/RDM protocol switch
- Compatible with Velcro straps or M10 screw clamp
- Indoor locking power socket
- Compact and lightweight design
**Technical Specifications**:
- **Protocols**: DMX512, RDM
- **Physical**: Truss Mount with Velcro Straps or M10 Screw Clamp (Clamp Not Included), 1x Indoor 5 - pin XLR input, 1x Indoor 5 - pin XLR thru, 6x Indoor 5 - pin XLR outputs, Link Out Termination Switch, DMX/RDM Protocol Switch, Indoor Locking Power Socket
- **Dimensions & Weight**: Length: 4.73 inches (120 mm), Width: 5.43 inches (137.75 mm), Height: 5.10 inches (129.55 mm), Weight: 1.83 lbs (0.83 kg)
- **Power**: AC Input: 100 - 240V 50/60Hz, Power Consumption: 2.7W at 120V and 2.9W at 230V, Power Input Protection: Fuse, T1.25A/250 (5.2x20 mm)
- **Thermal**: Ambient Operational Temperature: 32°F to 113°F (0°C to 45°C), Humidity: Less than 75%, Storage Temperature: 77°F (25°C)
- **Certifications & IP Rating**: CE, cETLus, UKCA, FCC, IP20
**What’s Included**:
- ADJ Data Distro 6 Unit
- Truss Mount with Velcro Straps
- Power Cable
- User Manual
Using the ADJ Data Distro 6 is easy. First, connect your power cable to the indoor locking power socket. Make sure your power source is within the 100 - 240V 50/60Hz range. Then, plug your DMX or RDM device into the 5 - pin XLR input. The signals will pass through and be split to the six 5 - pin XLR outputs, which you can connect to other lighting devices.
When installing, you can use the truss mount with Velcro straps or an M10 screw clamp (you need to get the clamp separately). Adjust the link out termination switch and DMX/RDM protocol switch according to your signal routing and compatibility needs.
Here are some important things to note. Keep the unit in an environment where the temperature is between 32°F and 113°F (0°C to 45°C) and the humidity is less than 75%. Avoid using it in extremely hot, cold, or humid conditions. Also, don't overload the power input. The power consumption is 2.7W at 120V and 2.9W at 230V, and there's a T1.25A/250 fuse for protection.
For maintenance, keep the unit clean. You can use a soft, dry cloth to wipe it. If there are any signs of damage to the power cable or connectors, replace them right away. And always refer to the user manual for detailed information and troubleshooting.
