The Antari DarkFX Spot 510IP is an outstanding outdoor - rated UV LED spotlight with an IP65 rating. It offers high efficiency and low power consumption. This spotlight emits a peak wavelength of 365nm, with a radiant flux output of 4500mW at full intensity and minimal visible light. As a result, all UV - reactive materials, art pieces, amusement park displays, and signage will shine with bright and vivid colors. Key features include an IP65 outdoor rating, a 15 - degree narrow beam angle, a 365nm peak wavelength with little visible light, 4500mW high output at full intensity, special optics to prevent wear from high UV exposure, and flicker - free operation suitable for TV and film. Technical specs: It uses (6) 1.9W high - power UV LEDs with an average LED life of 20,000 hours. The optics have a 15 - degree angle, the peak wavelength is 365nm, and the radiant flux output is 4500mW. It requires a DarkFX Drive 4 Power/DMX Fixture Driver (sold separately) and connects via a 22 AWG bare wire power/data combo cable. The length is 4.4” (110.5mm), width is 1.96” (46.8mm), vertical height is 5.3” (134.25mm), and dry weight is 0.71 lbs. (1.6 kg). It runs on DC 20 - 24V with a max power consumption of 12W and has CE and IP65 approvals.
Using the Antari DarkFX Spot 510IP is easy. First, make sure to connect it to a DarkFX Drive 4 Power/DMX Fixture Driver (sold separately) using the 22 AWG bare wire power/data combo cable. Then, plug it into a DC 20 - 24V power source. You can place it outdoors as it's IP65 rated, perfect for illuminating UV - reactive materials, art, and displays. When using it for TV or film, enjoy its flicker - free operation. As for maintenance, keep it clean and dry. Avoid exposing it to extreme conditions. Since it has special optics to prevent wear from high UV exposure, you don't have to worry too much about degradation. Also, remember that the average LED life is 20,000 hours, so you'll get a long - lasting performance. But if you notice any issues, check the power connection and the driver first.
