The Dracast DRLF500PD is a top - notch daylight lighting fixture from the Fresnel Studio Series. It comes with a 4 - inch lens that lets you adjust the beam angle from 15 to 60 degrees, perfect for both flood and spot lighting. The surface - mounted LEDs have a high CRI of 95, ensuring accurate color reproduction. With a color temperature of 5600K, it provides a natural daylight - balanced light. You can dim it continuously from 0 to 100% using on - board controls or through 5 - pin XLR connections. Key features include an adjustable beam angle, high - CRI LEDs, 5600K color temperature, smooth dimming, 5 - pin XLR DMX input and output, a passive heat sink cooling system, 50W power consumption, 4 - way barndoors, 5/8” mounting yoke, and an aluminum construction. It can operate on 110 - 240 VAC, 50 - 60 Hz, and 36 VDC.
Using the Dracast DRLF500PD is easy. First, decide on your lighting needs. If you want a wide - spread light, adjust the 4 - inch lens to increase the beam angle up to 60 degrees. For a more focused light, set it to 15 degrees. To control the brightness, you can use the on - board manual controls or connect it via the 5 - pin XLR for more advanced control. When it comes to power, you can use either 110 - 240 VAC at 50 - 60 Hz or 36 VDC. Make sure to use a proper power source. As for maintenance, keep the fixture clean by gently wiping it with a soft, dry cloth. Avoid using harsh chemicals as they might damage the aluminum construction. Also, since it has a passive heat sink cooling system, ensure there is enough space around the fixture for proper air circulation. If you notice any issues or if the light starts to flicker, check the power connections first.
