The Eliminator Lighting Vortex is an amazing lighting product. It offers a classic moonflower effect, powered by an 80W LED engine that generates multiple razor - sharp 5 - degree beams of light through a barrel mirrored scanner. With 10 Color/GOBOs combinations, a GOBO shake effect, and mesmerizing strobe effects, along with 6 built - in light shows, it's a visual treat. You can control it via DMX, Remote Device Management (RDM), sound activation, or use the 4 - button control menu with a digital display in show mode. The barrel moves quickly, with 180 - degree movement on the X - axis and 260 - degree movement on the Y - axis. You can focus the beams using the manual focusing knob. Compact and lightweight, it's perfect for low - ceiling venues, tight spaces, bars, lounges, roller rinks, jump parks, and fun centers. Key Features: 80W White LED (50,000 Hrs.), 10 Color / Gobo combinations, 6 Built - In Light Shows, X - Axis 180° and Y - Axis 360° barrel movement, multiple 5° beams, and a beam focusing knob. Technical Specifications: Light source is an 80W White LED (50,000 Hrs.), barrel mirror and movement as described, beam angle of multiple 5° beams, 10 Color / Gobo combinations with shake, 1 - 40Hz strobe rate, 6 built - in light shows, controllable via DMX512, RDM, sound, and show mode with 2 DMX control modes (10 & 12 Channels) and a 4 - button digital display. It has 3 - pin DMX In/Out, indoor locking power input, a safety eye, 100 - 240VAC, 50/60HZ power, 100W power consumption, dimensions of 12.3” x 11.11” x 6.2” (312x282x157mm), weight of 7.1 lbs. (3.2Kg), CE and cETLus (Pending) approvals, and IP20 rating. It comes with an adjustable angle hanging bracket and a power cable.
Using the Eliminator Lighting Vortex is a breeze. First, make sure you've connected it properly. Plug in the power cable to a suitable indoor power source with 100 - 240VAC, 50/60HZ. Then, you can use the 4 - button control menu with a digital display to select from the 6 built - in light shows or set your preferred control mode, like DMX, RDM, or sound activation. If you want to change the look of the light, you can play around with the 10 Color/GOBOs combinations. To adjust the direction of the light, the barrel can move 180 - degrees on the X - axis and 260 - degrees on the Y - axis. And if you need to focus the beams, just use the beam focusing knob. As for maintenance, keep it in a dry and clean place. Avoid exposing it to excessive dust or moisture. Check the power cable regularly for any signs of damage. When not in use, store it safely with the adjustable angle hanging bracket attached. And always remember to follow the safety instructions. Don't touch the light source directly when it's on, as it can get hot. Also, make sure to attach a safety cable to the safety eye for added security.
