Ubiquiti airMAX GigaBeam Plus 60 GHz Radio
The Ubiquiti airMAX GigaBeam Plus 60 GHz radio offers outstanding high-performance point-to-point wireless connectivity. Thanks to its advanced Cassegrain reflector and high-gain capabilities, it provides ultra-fast 1.5+ Gbps throughput and can cover a link range of 1.5+ km. Ideal for setting up a strong ISP infrastructure or long-range wireless backhaul, this radio guarantees top reliability and speed, even in tough conditions.
Key Features
- Top-notch 60 GHz radio for point-to-point links
- 1.5+ Gbps throughput and 1.5+ km reach
- Advanced Cassegrain reflector for excellent performance
- Weather-resistant and built to last
- Simple installation with integrated PoE and advanced software management
Technical Specifications
Dimensions: Ø155 x 137 mm (Ø6.1 x 5.4')
Weight: 1 kg (2.2 lb)
Enclosure Material: UV-resistant polycarbonate, stainless steel
Mount Material: Metal
Wind Loading: 50 N at 200 km/h (11.24 lbf at 125 mph)
Processor: Quad-Core ARM® Cortex® A7
Memory: 256 MB DDR3
Networking Interface: (1) GbE RJ45 port
RF Connections: Internal
Max Power Consumption: 11W
Power Method: Passive PoE 2-pairs (4, 5+; 7, 8-)
Power Supply: 24V DC, 0.5A gigabit PoE adapter (Included)
Supported Voltage Range: 22—27V DC
ESD/EMP Protection: Air/contact: ± 24kV
Ambient Operating Temperature: -40 to 60° C (-40 to 140° F)
Ambient Operating Humidity: 5 to 95% noncondensing
Certifications: FCC, IC, CE
Operating Frequency: 57,000 - 66,000 MHz (Dependent on regional regulations)
Channel Bandwidth: 2160 MHz
Operating Channels: 58320, 60480, 62640, 64800 MHz
Beamwidth: Azimuth: 2° (-3 dB) / 3° (-6 dB), Elevation: 2° (-3 dB) / 3° (-6 dB)
Bluetooth: 2400 - 2483.5 MHz
Electrical Downtilt: 0°
LEDs:
Power: Flashing white: booting up, White: not connected to UISP, Blue: connected to UISP
Ethernet: Flashing blue: Ethernet traffic detected
60GHz: Blue: connected
Operating Modes: PtP master or station
Security: WPA2 AES only
Management Interface: UISP application (web/mobile)
Minimum Software Requirements: Any modern web browser/iOS™ or Android™ based smartphone
Using the Ubiquiti airMAX GigaBeam Plus 60 GHz radio is quite easy. First, make sure you have the included 24V DC, 0.5A gigabit PoE adapter. Connect it to the radio using the passive PoE 2 - pairs method. Then, connect the networking interface to your device via the GbE RJ45 port. You can manage it through the UISP application on your web browser or mobile device. When installing, ensure it's in a location with a clear line - of - sight for point - to - point connections. As for the environment, it can work in temperatures from - 40 to 60°C and humidity between 5 to 95% non - condensing. Just be careful not to expose it to extreme conditions beyond these ranges. For maintenance, keep the radio clean from dust and debris. Since it's weather - resistant, it can handle normal outdoor conditions, but if it gets dirty, you can gently wipe it with a soft cloth. Also, regularly check the connections to make sure they're secure and there are no signs of damage.
