The Dracast Pro Series 3-Light Bi-Color Interview Kit with V-Mount Battery Plates is a must - have for location shooters. It comes with 2 LED500 Pro Bi - Color lights. Each LED500 has a multi - voltage power adapter, a soft case, an 8.7’ light stand, a V - mount battery plate, and a battery. There's also a dual charger for the batteries. An LED160A Bi - Color light is included, too, with a power supply, a built - in Sony NP - F series battery plate, battery, charger, and soft case. The kit also has two filter frames and two filter packs for the LED500 lights. The LED160A uses 160 LEDs with a CRI rating of 95, offering 3200 - 5600K output with accurate color and a 45 - degree beam spread. It has an aluminum chassis, is lightweight at 1/2 pound, and has a built - in dimmer for flicker - free light output from 0 to 100% at any frame rate. A separate knob controls color temperature. It can run on AC or NPF - type camera batteries. The LED500 Pro Bi - Color LED Light weighs just 4.0 lb, perfect for location work, interviews, and small sets. It has a variable color temperature from 3200 - 5600K, allowing you to quickly match ambient light. Dimming is easy with negligible color shift. It outputs the equivalent of 500W hot light but runs cool and only draws 30W. The anodized aluminum frame is supported by an oversized U - shaped yoke. It can be powered by a 100 - 240 VAC adapter or 12 VDC batteries. The Battery and Dual Charger Kit has two V - mount lithium - ion batteries and a dual charger. The Filter Frame for LED500 is made of lightweight aluminum and has a frame lock. The 5 - piece Filter Set for LED500 includes various filters to modify light. The bundle items come with carry cases, power adapters, warranties, and more accessories.
Using this Dracast lighting kit is a breeze. For the LED500 Pro lights, you can use the included AC adapter in the studio or V - mount batteries in the field. To adjust the color temperature, simply turn the corresponding knob until you get the right match for the ambient light. The dimming knob lets you control the light intensity smoothly. When using the LED160A on - camera light, you can power it with the built - in Sony NP - F series battery or an AC adapter. Attach it to your camera using the hot - shoe mount. When it comes to the batteries, use the dual charger to keep them ready. Make sure to check the five - LED status indicator on the batteries to know their power level. For the filter frames and sets, just drop the frame into the LED500's accessory channel and insert the filters. Be careful not to let the filters slip. When storing the kit, put the lights in their carry cases and keep the accessories organized in the hard carrying case. To maintain the lights, keep them clean and dry. Avoid exposing them to extreme temperatures or moisture. If there's any damage, refer to the limited 1 - year warranty for assistance.
