The Dracast DR500DG2KSK LED500 Pro Series Daylight 2 Light Kit is a great pick for on-the-go photographers. It comes with two LED500 Daylight lights, each having a multi-voltage power adapter, a carry case, and a 7.2’ light stand. Weighing just 4.0 lb, these lights are perfect for location shoots, interviews, and small sets where color accuracy, control, and flicker-free output matter. With a 5600K daylight balance, they pair well with strobes or HMI fixtures and ambient daylight. You can easily dim the lights from 0 - 100% with little color shift, and they only draw 30W, giving you a quick return on investment. The lights have a durable anodized aluminum frame supported by an oversized U-shaped yoke with locking knobs and a standard 5/8” receiver. They can be powered by the included 100 - 240 VAC adapter or optional 12 VDC batteries. The kit also includes two Dracast DLS-805 Spring-Cushioned Light Stands (6’). These stands extend from 28.5” to 72” and can hold up to 13 lb. They fold down to 28.5” for easy transport and weigh 3.4 lb. Made of lightweight anodized aluminum to reduce reflections, they are spring-cushioned to protect lighting fixtures when lowering. Large knobs make adjustments quick and smooth. In the box, you'll find 2 LED500 Lights with Gold Mount Plates, 2 7.2’ Light Stands, 2 Carry Cases, and 2 Power Supplies. Technical specs include a 45 beam angle, 5600K color temperature, CRI 95 color accuracy, 0 - 100% dimming, and more. It comes with a limited 1-year warranty.
Using the Dracast LED500 Pro Daylight 2-Light Kit is a breeze. First, set up the light stands. Unfold the DLS-805 Spring-Cushioned Light Stands and adjust them to your desired height using the large, easy - to - grip knobs. Make sure the stands are stable on the ground. Then, attach the LED500 lights to the stands using the 5/8” receiver on the light and the 5/8” stud on the stand. You can power the lights in two ways. You can use the included 100 - 240 VAC power adapter if you're near an electrical outlet. Or, if you're on the go, use optional 12 VDC batteries with the Gold Mount plates. To adjust the light intensity, turn the dimming knob. You can go from 0 to 100% brightness with very little color shift. When it comes to taking down the kit for transport, lower the light stands carefully. The spring - cushioned design will help protect the lighting fixtures. Fold the stands down to their collapsed height of 28.5”. Then, place the lights, stands, power supplies, and other accessories in the carry cases. As for maintenance, keep the lights and stands clean. Wipe the aluminum housing of the lights with a soft, dry cloth. Check the stands regularly for any signs of wear or damage, especially the locking knobs. Remember, this kit comes with a limited 1 - year warranty, so if you have any major issues, contact the manufacturer.
