American DJ's ECO UV BAR DMX Blacklight LED Fixture is a game - changer for any light show or lighting setup. It combines the convenience of LED technology with the user - friendly control of DMX - 512. Ideal for performance stages, theatrical productions, special effects installations, and mobile light shows, this fixture adds a dynamic touch to your events.
The ECO UV BAR DMX offers unparalleled flexibility and control. With a built - in DMX - 512 protocol (3 DMX channels), a 3 - Button DMX display, an included IR remote control, and AC In/Out power linking through built - in IEC connectors, it has three operational modes to suit your needs. The LEDs are rated at 50,000 hours, meaning you'll enjoy long - lasting, low - maintenance lighting.
**Key Features**:
- Bright 18x 3 - Watt UV LEDs for high - output ultraviolet lighting.
- Perfect for performance stages, theatrical shows, and special effects.
- Two operational modes: Manual and DMX - 512.
- 3 DMX Channels for precise control.
- Rear - panel on/off switch for easy operation.
- 120 - degree beam angle for wide coverage.
- LED strobe effect for added visual impact.
- Comes with mounting brackets for various installation options.
- Includes an IR Remote for convenient control.
- 3 - Button LCD display for easy setup.
- Linkable via 3 - pin XLR cable.
- Daisy - chain power up to 10 fixtures with IEC AC input and output.
- Long - life LEDs rated at about 50,000 hours.
**Technical Specifications**:
- Power Draw: 52W
- Multi - voltage operation: AC 100V - 240V 50/60Hz
- Light Source: 18x 3 - Watt UV LEDs
- Wavelength: 390 - 410nm
- Dimensions: 39.5 x 2.5 x 4.75 inches (1000 x 60 x 115mm)
- Weight: 5 lbs (2.3 kg)
Using your ADJ ECO UV BAR DMX Blacklight LED Fixture is easy. First, make sure to connect it to a power source within the multi - voltage range of 100V - 240V. You can either use the IEC AC input on the rear to daisy - chain multiple fixtures or plug it in directly. If you want to control it via DMX - 512, connect it using the 3 - pin XLR cable. For simple manual control, use the 3 - Button LCD display on the fixture or the included IR remote.
When installing, you can use the mounting brackets to fix it on the wall or ceiling, or place it on the floor for wall - washing effects. Adjust the beam angle of 120 - degrees according to your needs.
For safety, always turn off the fixture using the rear - panel on/off switch before making any connections or disconnections. Keep the fixture away from water and high - humidity areas.
Maintenance is a breeze. Since the LEDs are rated at about 50,000 hours, you won't have to replace them often. Just keep the fixture clean by gently wiping it with a dry cloth from time to time.
