The Antari DarkFX Spot 1750 is an amazing UV LED spot light. It offers high output with low power consumption, emitting a 365nm UV wavelength. At full intensity, it has a radiant flux output of 19,080mW with minimal visible light. This makes all UV reactive materials, art, amusement park displays, and signage shine with bright and vivid colors. Key features include a 20-degree beam angle, a 365nm peak wavelength with little visible light, high output at full intensity, special optics to prevent wear from high UV exposure, a 600Hz LED refresh rate, and flicker-free operation for TV and film. Technical specs: It uses 4 16W high-power UV LEDs with a projected 20,000-hour LED life. It can be controlled manually or via DMX 512 and RDM. It has a 4-button control panel, 5-pin DMX in/out, and powerCON in/out. Size: 9.2” long, 7.6” wide, 9.7” vertically high, and weighs 7.0 lbs. It runs on AC100 - 240V 50 - 60Hz with a max power consumption of 72W.
Using the Antari DarkFX Spot 1750 is easy. You can control it manually through the 4-button control panel or use DMX 512 and RDM for more advanced control. Connect it using the 5-pin DMX in/out and powerCON in/out. When setting it up, make sure it's in a stable position. Since it emits UV light, avoid direct eye contact to protect your eyes. For maintenance, keep it clean and dust-free. If there are any signs of wear on the special optics, it might be time for a check-up. Also, make sure the power supply is within the specified AC100 - 240V 50 - 60Hz range to avoid damage. With proper use and care, this UV LED spot light will serve you well for a long time.
